|
|
Double-Wrap Rope Bit Gag by Rope Fashions
A double-wrap rope bit gag will make your partner feel well-gagged, and is quick to make. It is ideal if you need a gag in a hurry and forgot to bring one. It is also just the thing if you are a purist, and don't like mixing your bondage media (leather with rope, etc.). |
Step 1
To make a rope bit gag, you will need a 12-foot length of 5/16-inch
rope. Begin by making an S-shape about a foot from the end of the
rope. The width of the S should be about 5 inches.
|
Step 2:
Begin wrapping the long end of the rope around the S shape, moving toward
the short end of the rope. (In this case, the direction would be right to
left.) Leave enough of a loop sticking out of the wraps to fit one strand
of rope
|
Step 3:
Keep wrapping till you get to the other end of the S shape, and
have just enough of a loop to fit one strand of rope through. Put
the long end of the rope through that loop and pull it tight.
|
Step 4:
Continue wrapping, moving from left to right, forming a second layer of rope.
|
Step 5:
Keep wrapping until you reach the small loop you left at the beginning.
Pass the end of the rope through the loop and pull it tight.
|
Step 6:
The completed gag looks like this.
|
Step 7:
And this is how it looks in use. As you can see, this is a pretty
bulky gag. A lot of women may find this to be too large. In that
case, you should try a single-wrap rope bit gag, which is described
in another tutorial.
|
