Duct Tape Bondage: How To Body Wrap

Wolfe and Katt

Step 1: Assemble all your critical materials:

The basic materials that you are going to need, are Plastic wrap, Duct tape, bandage scissors, a willing and eager bottom, and an adventurous top space attitude!

(All are pictured above.) Saran wrap™ (or other low cost but clingy plastic wrap) is pretty critical under duct tape. It forms a barrier between the skin and the tape, protecting the skin and hair from harm. Absolute must !!! Bandage scissors which are available at a medical supply store, or some pharmacies. They are critical for quick and safe cutting out of wrap and tape. They are specially shaped so that you can easily cut away the wrap and tape without harming the person underneath.

Duct tape comes in loads of colors, and you can buy it at any hard ware or dollar store (a great place for tops to shop for toys and supplies) (Warning, unlike the top pictured above, do NOT stretch the wrap over your face or your bottom's face completely obscuring all airways it's plastic... okay, actually you can if you want, but only for a few moments!... after all we are pervs...)

Now just taping someone up is loads of fun, and there are lots of things you can make. You can simply tape or mummify certain or even all parts of a person, as long as they have an airway going, and that you make sure they are hydrated and not over heating. (Hydrated, but not over hydrated, your bottom having to go pee halfway through a bondage taping session may or may not be up your kink alley) And that you keep Saran wrap™, between them and the tape.

You can also make it more interesting, by cutting open the tape once you are done wrapping, and with additional supplies - a single hole punch and something to use as lacing i.e. string, ribbon, rope or cord, take your pick! You can create a lace-able duct tape bondage garment that can be re-used.

Custom made kink-wear for public events?

Get creative, use different colors, multiple colors, poor liquid latex over top, paint on it, stickers, shapes cut out of duct tape... I once saw someone make a duct tape bondage hood in black, and then cut out eye shapes of blue duct tape to place over the eye areas, and a red mouth shape to place over the mouth area. It was a beautiful thing, that laced in the back and could be re-used.

Okay, now that we've got you thinking.. back to the basic how - to's. After you've assembled all your materials.

Step 2:

Wrap your bottom in plastic wrap. Now, there are a number of ways you can start. We've found that we prefer to start with the bottom standing, so that you don't need to roll or lift the body to get the wrap to go around. This can be tricky, as usually the person getting wrapped, starts to get worked up, and get a play-high that can make them a bit wobbly. You want to make sure that you are supporting them, and that they have something (even if it's you) to hold on to, and maybe even a safe place to land if they are going to topple.

There are creative options you can consider before saran wrapping too. Would they want to be oiled first? and feel all slippery inside the bondage wrap? Would they want essential oils in the mix for therapeutic or hedonistic reasons? It could be a BDSM spa experience <smile>. You could put therapeutic mud, or seaweed in there. No bugs though, that would be really mean, really really mean. (I'm not going to think about that anymore.) Though you might threaten just a little.

Once you've wrapped your bottom up covering all the areas you want to duct tape with Saran wrap™, you are ready to start taping!

Step 3:

This is the fun part! Start from the bottom, or start from the top... heck start from the middle if you like, but we recommend an end. Cut strips in the width of the body for the one side you are working on, start with the front, or start with the back... and just work your way overlapping from one end to the next, one strip at a time. Once you're done with one side, roll!, and do the other.

Step 4:

Cutting and Lacing... Now we recommend that you finish any edges, cut or natural, by taking sections of tape and folding them over the edge to act as a reinforcement and as a solid line with no wrap showing. (Later once your garment is off, you may even decide to tape up the inside of it so that there is no loose Saran wrap™). You may or may not want to create a re-usable garment. You just may want to cut open the package and play with the contents.

But there are other options. Why not, after all the work of wrapping, go through a little more work and create a re-usable bondage garment? Taking a hole punch evenly space holes along the two cut edges that you want to re-lace together, and then lace away!

Other possibilities are to cut open access holes to areas that you would like to be accessible.

I'm sure you may come up with other possibilities of your own (If you do PLEASE e-mail them to us!!!)

If you'd like more examples of things you can do with duct tape... visit our photo galleries for some of our experiences.

Have fun and play safe!

XOX

Wolfe and Katt