|
Solomon Bar Rope Cuffs (Race Bannon Style)
by Rope Fashions
These wrist and ankle cuffs have the feel of rope,
but the convenience of leather restraints. Race Bannon,
of San Francisco, used to publish a brochure on making
them, which is where I first learned about them.
Slowly applying layer upon layer of rope to someone can be
very erotic. But sometimes you just want to restrain them
quickly. These restraints are as quick to apply as leather
cuffs, but are much less expensive, and are completely
adjustable.
They are just the thing for when you are out of town
and you realize you forgot your cuffs. Just go down to
the hardware store and get some rope, and some electrical
tape for the ends, and in half an hour you can make yourself
a set of cuffs.
They are also excellent for air travel, since they don't look
suspicious when your baggage is X-rayed.
|
Step 1:
For each cuff, you will need two ropes. The lengths aren't all that
critical, but 11 feet for the main rope (shown here in black) and
five feet for the cross rope (shown here in red) is about right.
Take the main rope and double it. Take the cross rope,
and tie an overhand knot in the middle, around the doubled
main rope. Leave a little bit of a loop of main rope sticking
out of the knot.
|
Step 2:
Cross the right end of the cross rope from right to left over the
main rope.
|
Step 3:
Now cross the left end of the cross rope from left to right under
the main rope, and stick the end through the loop that was formed
in the previous step.
|
Step 4:
Pull the ends of the cross rope tight. You have just tied a square
knot around the main rope.
|
Step 5:
Now cross the left end of the cross rope over the main rope from
left to right.
|
Step 6:
Cross the right end of the cross rope under the main rope from
right to left, and stick the end through the loop you formed in
the previous step.
|
Step 7:
Pull the ends tight.
|
Step 8:
Continue making square knots, alternating the left-to-right,
right-to-left and right-to-left, left-to-right pattern. If
you get confused about where you are in the sequence, just
look at the loops; one end of the cross rope has loops that
stay on top of the rope, and the other end has loops that
stay under the rope. Just make sure you continue that
pattern, and you will be OK.
|
Step 9:
Keep tying square knots until you have enough to go around the
wrist or ankle. Take the ends of the main rope and run them
through the loop in the main rope. The square knots should
completely surround the wrist or ankle, and the restraint
should be snug, but not tight. If it is too snug, add some
more square knots. If it is too loose, take some away.
|
Step 10:
Here is how the restraint looks on the wrist.
|
Step 11:
Now take the ends of the cross rope, and tie a square knot over
the loop, locking it in place. Tie the ends of the main rope
to something, and your partner is restrained.
|
Step 12:
When you're done playing, just untie the knot around the loop,
get some slack in the main rope, and slide the restraint off
the wrist or ankle. You can keep it like this, ready for next
time you want to play.
TyingItAllTogether has a video on YouTube that demonstrates how
to tie a decorative, non-kinky, Solomon bar. You might take a
look at it to see the how the basic knots are tied. The video is
here.
|
